Case IH AFX8010 Repair Manual page 1533

TRAVELLING - REAR AXLE
8
20042892
Bottom Neutral Position
•
When the piston (1) is at the bottom of the cam lobe (2), the oil supply is cut off. The ports (3) in the distributor (4)
and the cylinder block (5) are NOT in alignment with each other. In this neutral piston the piston does NOT provide
power to the cylinder block, however, the piston (and roller) remains in the contact with the cam surface.
In order to continue driving power, another piston must take over for the first one to drive the cylinder block in the
direction shown, enabling the first to climb the next cam lobe in a smooth and uninterrupted manner.
9687 1 27/05/2004
D.12.A / 17