Case IH AFX8010 Repair Manual page 1464

8. Install the cover onto the shaft using the six bolts (1).
9. If the valve was removed be sure to install new O
ring seals and lube them with hydraulic oil.
10. With the plate installed, torque the bolts (1) to 89 -
100 Nm ( 66 - 74 lb ft )
POWER TRAIN - PROCESS DRIVE Primary process drive
9683 1 27/05/2004
C.50.B / 16
8
20035859C5
9
20035867
10
20035859C5