Case IH AFX8010 Repair Manual page 1495

9. Remove retaining ring (1). Remove planet gear
carrier (2) with the planet gears.
NOTE: Refer to Final drive Reducer, satelite and
planetary - Disassemble (D.10.A.42.50 - F.10.A.25) to
disassemble the planet gears.
10.
Remove outer housing (1) from output shaft (2).
NOTE: The bearing on the output shaft will be damaged
when it is removed.
NOTE: The seal in the planetary final drive housing will be
damaged when it is removed.
11. On the inner final drive housing, remove retaining
ring (1) and the small sun gear.
NOTE: The sun gear and the output gear are marked. If
for any reason the marks are not visible, apply a mark on
both gears before taking them apart.
12. Remove retaining ring (2) and the output gear with
the bearings.
NOTE: Refer to Final drive Reducer, spur gear -
Disassemble (D.10.A.42.44 - F.10.A.25) to disassemble
the output and sun gears.
TRAVELLING - FRONT AXLE
9686 1 27/05/2004
D.10.A / 15
8
zda4359a
9
zda4357a
10
zda4356a
11
zda4354a