Case IH AFX8010 Repair Manual page 1980

9. Disconnect the plug connectors (1) from the wire
harness.
10. Disconnect the connector (1) for the feeder position
sensor (2). Remove the bolt (3)from the position
sensor bracket (4). Remove the position sensor
(2)from the feeder housing.
11. Remove the four smaller bolts (1) that connect
the universal joint to the feeder input shaft yoke.
Remove the four larger bolts (2)from the universal
joint connecting the main feeder drive shaft (3)and
the feeder input shaft (4). Remove the universal
joint.
12. Remove the two bolts (1) from the yoke. Remove
yoke (2) from the shaft.
CROP PROCESSING - FEEDING Feeder housing
9712 1 27/05/2004
K.25.E / 8
8
10030322A4
9
40030324A4
10
10030325A4
11
10030041A4