Braking Device - Replace (D.32.C.58 - F.10.A.30) - Case IH AFX8010 Repair Manual

Braking device - Replace (D.32.C.58 - F.10.A.30)

AFX8010
The parking brake pads must be replaced if the remaining thickness is less than 1 mm.
Prior operation: Release the hydraulic parking brake, use mechanical release procedure. Parking brake override
- Static description (D.32.C.59 - C.30.A.20).
IMPORTANT: Use genuine CNH brake pads as they will give the best performance.
1. Remove retaining clip (1) and shaft (2) together
with washers (3) and spring (4) on both sides of the
parking brake shoe. Remove the park brake pads.
2.
Install a new set of pads. Reinstall washers (3)
spring (4) and shaft (2). Secure with retaining clip
(1).
Next operation: Check for correct piston travel and adjustment Braking device - Travel adjust (D.32.C.58 -
F.45.A.45).
TRAVELLING - PARKING BRAKE Hydraulic
9691 1 27/05/2004
D.32.C / 12
1
50040352
2
50040353