Case IH AFX8010 Repair Manual page 1781

BODY AND STRUCTURE - ENVIRONMENT CONTROL Heating, ventilation and air-conditioning
Heater - Remove (E.40.D.35 - F.10.A.10)
AFX8010
1. It is possible to completely remove the heater
core from the ventilation housing without removing
the coolant and lines. If the heater core is to be
removed from the combine, shut the heater core
supply and return valves located at the engine. The
supply to the cab is located at (1) and the return
from the cab is located at (2) .
2. Turn out the five cap screws (1) holding the
ventilation system shield in place. Lift the shield
from the combine.
3. Remove the recirculation filter by simultaneously
push down while pulling out on the locking tabs (1) .
4. Pull the grate (2) and filter (1) from the cavity.
9702 1 27/05/2004
E.40.D / 37
1
20018349
2
10036357A5
3
10008336A5
4
10008337A5