Case IH AFX8010 Repair Manual page 2084

Drive system Drive and gear - Remove (K.40.C.40.44 - F.10.A.10)
AFX8010
Prior operation: Engine hood - Remove (E.20.A.72 - F.10.A.10)
1. Block the rear of the rotor with a block of wood so
the rotor does not drop down when the gearbox is
removed.
NOTE: Through the access door in the grain tank, the
rotor access panel (1) can be removed and used for aid in
the removal process if needed.
2. Remove the strawhood access panel to gain better
access to the gearbox. Remove the bolts on each
side (1), and the bolts on the front and rear (2) of
the panel.
3.
Drain the gearbox fluids and remove the drain line.
4. Disconnect the sensor electrical connection.
5.
Disconnect the shift cable linkage from the gearbox.
6. Disconnect the dipstick tube.
CROP PROCESSING - THRESHING Axial flow threshing
9714 1 27/05/2004
K.40.C / 14
1
10030051A4
2
50034644A5
3
50034645