Case IH AFX8010 Repair Manual page 1992

Drive system - Remove (K.25.E.40 - F.10.A.10)
AFX8010 Without stone trap
1. Raise the feeder completely and engage the
cylinder safety stop.
2. Remove the feed chain as described in Feed chain
- Remove (K.25.E.48 - F.10.A.10).
3. Hook the strap (1) to hold the flap seal away from
the feeder. Remove the bolts (2) and remove the
front rotor cover (3).
4. Remove the floor section (1) by removing the bolts,
washers and nuts (2). Push the floor up, then back,
then bring the front end down and out.
5.
Support the end of the drive shaft. Disconnect the
drive lines (1) and the speed sensor (2) and remove
gearbox (3) from the feeder.
CROP PROCESSING - FEEDING Feeder housing
9712 1 27/05/2004
K.25.E / 20
1
40030317
2
10032087A5
3
10032083A5
4
50032030A5