Case IH AFX8010 Repair Manual page 1234

Shaft - Install (C.20.B.43 - F.10.A.15)
AFX8010
1. To install the input shaft in the transmission, first
install shim pack (2) of 1.5 mm (1/16 in) and O-ring,
(3) on cover (1).
2. Install bearing cup (1).
3. Install cover (2) with shim pack and O-ring and
tighten the five nuts (1). Torque the five M10 nuts to
46 - 52 Nm (34 - 38 lb ft). Support the input shaft
on a hoist and bring it into the transmission.
POWER TRAIN - TRANSMISSION Mechanical
9680 1 27/05/2004
C.20.B / 44
1
3414a
2
3344a
3
3340b