Gearbox - Assemble (K.25.E.44 - F.10.A.20)
AFX8010
1.
Place the bearings (1) in the inner seats of the
housing for the conveyor & rocktrap output shafts.
2.
Using the proper slug, tap or press the bearings (1)
until they are fully seated in the housing.
3.
Be sure to use the proper orientation of drive gears
for installation.
4.
Install the output shaft drive gears (2) and spacers
(1) into the housing.
CROP PROCESSING - FEEDING Feeder housing
9712 1 27/05/2004
K.25.E / 35
1
10034637A5
2
10034640
3
10034635A5