Case IH AFX8010 Repair Manual page 1466

14. Install the electrical connector (1) to the valve, and
any place else if they were removed for access.
15. Install the key into the shaft.
16. Use Loctite Brand 767 anti-sieze on the shaft before
installing the pulley. Install the pulley (3) onto the
shaft with the washer (2) and bolt (1). Torque the
M12 bolt to 98 Nm ( 72 lb ft ) .
17. Install the belts (1) and (2) on the pulley.
POWER TRAIN - PROCESS DRIVE Primary process drive
9683 1 27/05/2004
C.50.B / 18
14
10036391A5
15
50041890A5
16
10036393A5