BODY AND STRUCTURE - ENVIRONMENT CONTROL Heating, ventilation and air-conditioning
4.
Turn out water valve mounting cap screws.
Disconnect the electrical connection (1). Disconnect
the hoses (2) from the valve. Carefully move the
water valve out of the way of the blower housing.
5.
Disconnect ventilation duct. Turn out plenum cap
screw. Detach electrical connector. Remove the
four blower motor mounting cap screws.
6.
Carefully slide the blower motor assembly from the
ventilation housing.
9702 1 27/05/2004
E.40.D / 46
4
10036361A5
5
10008347