Case IH AFX8010 Repair Manual page 1187

42. Assemble PTO pan to housing. Clean both mating
surfaces. Apply a unbroken bead (1) of Loctite 515
to bottom flange of PTO housing as shown. The
bead must be held close to outside edges and as
close to the bolt holes as possible.
43. Loose assemble the lube oil lines onto the gearbox
to get them aligned. Once they are routed correctly
torque the tube nuts to 43 - 47 Nm (32 - 35 lb ft)
using a 24mm open end torque wrench. Torque
the lock nuts on the tee to 45 - 49 Nm (33 - 36 lb
ft) using a 19mm open end torque wrench. Hold
the tee body with a 30mm open end wrench while
torquing to prevent tube damage.
44.
Add ISO mounts (1) to lube lines. Torque bolts to 24
- 26 Nm (18 - 19 lb ft).
POWER TRAIN - POWER COUPLING Fixed coupling
9679 1 27/05/2004
C.10.B / 21
35
20035882A5
36
50040394
37
20035872A5