Case IH AFX8010 Repair Manual page 1983

4. Grease and install the pivot pin (1). Install the bolt
and washer (2) through the feeder house.
5. Repeat for opposite side.
WARNING
M184D - ALWAYS shut OFF engine, remove the key
and engage feeder safety lock in position on lift
cylinder before working under header or feeder.
Failure to engage feeder safety lock may cause injury
or death.
6.
Working from the side of the feeder house, raise
each lift cylinder up to the feeder house and install
the front retaining pin (1) for each lift cylinder in
the feeder house. Secure the retaining pins in the
feeder frame with the cotter pins (2).
7. Use the hydraulics to raise the feeder high enough
to engage the feeder safety lock. If the feeder safety
lock cannot be engaged, lower the feeder house
completely to the ground.
CROP PROCESSING - FEEDING Feeder housing
9712 1 27/05/2004
K.25.E / 11
3
40030326B4
4
40030039B4
5
40030317