Drive system - Remove (K.25.E.40 - F.10.A.10)
AFX8010 With stone trap
1.
Raise the feeder completely and engage the
cylinder safety stop.
2.
Remove the feed chain as described in Feed chain
- Remove (K.25.E.48 - F.10.A.10).
3.
Remove the bolts, washers and nuts (1) and lower
the stone trap (2) and front floor section (3).
4.
Support the end of the drive shaft and stone beater.
Disconnect the drive lines (1) and the speed sensor
(2) and remove gearbox (3) from the feeder.
5.
Remove the front cap (1).
CROP PROCESSING - FEEDING Feeder housing
9712 1 27/05/2004
K.25.E / 16
1
40030317
2
10032094B5
3
50032030A5
4
10032092B5