Drive system - Install (K.25.E.40 - F.10.A.15)
AFX8010 With stone trap
1.
Raise the feeder completely and engage the
cylinder safety stop.
2.
Install the drive shaft (1) into the feeder with the
threaded end toward the right hand side.
3.
Insert 1-1/2" washer and 1-1/2" bolt (1) into the end
of the drive shaft.
4.
Line up the drive shaft (1) and the beater drum (2).
Coat the splines with #2 moly disulfide grease, then
install the gearbox.
CROP PROCESSING - FEEDING Feeder housing
9712 1 27/05/2004
K.25.E / 18
1
40030317
2
50040148A5
3
50040158A5
4
10032093A5