BODY AND STRUCTURE - ENVIRONMENT CONTROL Heating, ventilation and air-conditioning
Compressor Magnetic clutch - Install (E.40.D.31.80 - F.10.A.15)
AFX8010
1.
Install the field coil. The coil flange protrusion must
match the hole in the front housing to prevent coil
movement and the lead wire must be correctly
located.
2.
Replace the rotor pulley.
3.
Support the compressor on the four mounting ears
at the compressor rear side. If using a vise, clamp
only the mounting ears, never compress the body
itself.
4.
Align the rotor assembly squarely on the front
housing hub.
5.
Using a hammer and a special tool, tap until the
rotor bottoms to the compressor front housing hub.
9702 1 27/05/2004
E.40.D / 24
1
20018369
2
20018370
3
20018371