Case IH AFX8010 Repair Manual page 2020

Idler roller - Clearance (K.25.E.57 - F.45.A.12)
AFX8010
The feeder drum height support plate (1) has three positions: low position - down (shown) for small grains; high
position - up for corn and other large grain; and mid position - sideways for edible beans, etc.
1. Loosen nut (1) approximately one turn. Rotate the
bolt (2) to the desired position on both sides of the
feeder, then tighten the nut (1). Torque to 200 - 220
Nm (149 - 161 lb ft).
Next operation: Feed chain - Tension adjust (K.25.E.48 - F.45.A.40)
CROP PROCESSING - FEEDING Feeder housing
10032077A5
9712 1 27/05/2004
K.25.E / 48
1
2
10032076A5