4.
Remove selector ring (1) at the same time remove
two balls (2) and the springs behind it. The balls
(2) are spring loaded, do not lose them. Remove
retaining ring (3) and the washer.
5.
Remove housing (1) and gear (2).
6.
Remove needle bearings (1).
7.
Remove bearing (1) on the other side.
NOTE: Bearing (1) will be damaged when it is removed.
POWER TRAIN - TRANSMISSION Mechanical
9680 1 27/05/2004
C.20.B / 50
4
3399a
5
3400a
6
3401a
7
3402a