4.
Insert the pinion shaft (1) into the housing. Install
the seal ring (2) and the bearing (3). Place shims
(4), spacer (5) and snap ring (6) on the shaft.
5.
Check the rolling torque. Nominal range should be
0.58 - 0.88 Nm (5.2 - 7.8 lb in).
6.
Install snap ring, spacer, and shims. Install the
bearing (1).
POWER TRAIN - FRONT PTO Mechanical
9682 1 27/05/2004
C.42.B / 18
4
50040145A5
5
10040109
6
10040110A5