4.
Pull out shaft (1) together with bearing (2).
5.
Remove six nuts and washers (1). Remove two
bolts and washers (2).
6.
Install two bolts (1) (M10 x 60) to push bearing
housing out of gearbox housing (2).
7.
Support the differential with a hoist to prevent it
from falling into the gearbox. Remove four nuts
and washers (1) from the right side differential
shaft housing. Remove two Hex Socket Head Cap
Screws (2). Remove two bolts and washers (3).
POWER TRAIN - TRANSMISSION Mechanical
9680 1 27/05/2004
C.20.B / 57
4
3264a
5
3265a
6
3266a
7
3267a