Case IH AFX8010 Repair Manual page 2089

8. Disassemble and take away the gears (1)(4)(6),
spacers (2), (5) and, inner ring (3) from housing.
9. Unlock bolts (4) take away washers (3), wrapper (2)
and spacer (1). Disassemble outer ring (5) using a
chisel and hammer.
10. Remove the punched area on the stakenut (1),
take away washer (2), and crown wheel (3).
Disassemble inner ring (4) from the crown wheel (3)
using a bearing separator. Disassemble snap ring
(5) and shim (6) from the shaft. Disassemble cap
(9) using a chisel and hammer. Remove punched
area on stakenut (8), unlock the stakenut and take
away washer (7).
11. Extract gear (1) from the shaft (6). Extract needle
bearings (2) from the gear (1) and snap ring (3).
Take away spacer (4) and shift collar (5) from the
shaft.
CROP PROCESSING - THRESHING Axial flow threshing
9714 1 27/05/2004
K.40.C / 19
8
10041871A5
9
10041872A5
10
10041873A5
11
10041874A5