Shaft - Remove (C.20.B.43 - F.10.A.10)
AFX8010
Prior operation: If the shifting disc is not removed from the transmission, first proceed with the first three steps of
Transmission command - Remove (C.20.B.05 - F.10.A.10) to bring the shifting disc to it's highest position.
1.
To remove the drive shaft, first remove the five nuts
and washers (1). Remove two bolts and washers
(2).
2.
Insert two bolts (1) in cover (2) and pull the cover.
NOTE: Keep shim pack and O-ring with the cover.
3.
Remove driver shaft (1) and selector fork (2) with
a hoist.
POWER TRAIN - TRANSMISSION Mechanical
9680 1 27/05/2004
C.20.B / 40
1
3332a
2
3333a
3
3334a