Case IH AFX8010 Repair Manual page 1446

11. Install the outer seal ring, spacer (1) and snap ring
(2). Pump Moly grease in the lube fitting (3) until
grease comes out the seal. Wipe clean.
12. Install the output shaft seal rings (1) on both output
shafts.
13.
Install the shield (2) using four M10x20 bolts (1).
Next operation: Gearbox - Install (C.42.B.45 - F.10.A.15).
POWER TRAIN - FRONT PTO Mechanical
9682 1 27/05/2004
C.42.B / 20
11
10033809A5
12
10033808A5
13
10033804A5