8.
Rotate the cable around, then down, releasing
the keeper from the lever (1). Pull the electrical
connectors (2) from the micro switch.
9.
Remove screw (1). Using a screwdriver, push in
tabs at (2).
10.
Using a finger or a screwdriver, push in cable clip
(1).
11.
Turn out screw (1). Push the pin and rubber
grommets (2) from the belt (3).
12.
Remove lock nuts (4). Pull the adjuster part way
from the pedestal.
BODY AND STRUCTURE - USER CONTROLS AND SEAT
9698 1 27/05/2004
E.32.A / 11
8
40015768
9
40015766
10
40015769
11
40015770