Case IH AFX8010 Repair Manual page 1512

Final drive - Install (D.10.A.42 - F.10.A.15)
AFX8010
To install a planetary final drive, proceed as follows:
1. Insert two dowel pins (2) in the planetary final drive
housing (1). Install the planetary final onto the
traction axle of the combine. Apply thread locking
compound Loctite 646 on bolts (3) to prevent them
from loosening. Tighten bolts (3) to a torque of 670
Nm (495 lb ft). Fill the planetary final drive with 6.7
L (1.77 US gal) of CASE AKCELA 135H EP GEAR
LUBE SAE 80W-90
CAUTION
M501 - Some components of this machine are very
heavy. Use suitable lifting equipment or additional
help as instructed in the Service Manual.
2. Install the traction wheel and tighten wheel nuts (4)
to a torque of 710 - 790 Nm (525 - 580 lb ft).
Next operation: Install the half shaft lock couplers. Half-shaft - Install (D.10.A.43 - F.10.A.15)
TRAVELLING - FRONT AXLE
9686 1 27/05/2004
D.10.A / 32
1
zda4669a