5.
Remove the two upper bolts (1) and the two lower
bolts (2) from the gearbox.
6.
Use a hoist with a lift strap or another person to help
remove the gearbox from the feeder. The gearbox
will most likely need to be pryed away from the
feeder house because of the splined shafts. Pry
away the gearbox evenly.
NOTE: The gearbox is heavy and requires the use of
another person or a hoist. Injury could occur if not properly
supported when removing.
CROP PROCESSING - FEEDING Feeder housing
9712 1 27/05/2004
K.25.E / 26
4
20034592A5