Case IH AFX8010 Repair Manual page 1698

4. To install the adjuster proceed with steps 4 - 10.
Attach the appropriate air lines to the adjusters as
required.
5. Attach the two air lines (1) from the adjusters to the
manifold at the bottom of the bellows.
6. Pass the cable (1) through the opening on the side
to install the keeper and cable into the adjuster.
7.
Pass the pin and grommets (1) through the looped
end of the adjuster strap. Install the pin into the
bottom of the pedestal and secure in place with
screw that had been previously removed at (2).
BODY AND STRUCTURE - USER CONTROLS AND SEAT
9698 1 27/05/2004
E.32.A / 14
4
40015772
5
40015765
6
40015771
7
40015773