Case IH AFX8010 Repair Manual page 2088

4. Unlock the bolts (7) and take away cover (6). Unlock
bolt (1) and take away washer(2), O-ring (3) and
yoke (4). Disassemble double lip seal (5) using a
chisel and hammer.
5. Disassemble caps (3)(10) using a hammer and
chisel. Take away snap ring (9) from the housing
and take away shim (8). Put the tool into position
(11) in order to fix the pinion. Hit the shaft (6), take
away the outer ring (7), the shaft (6), the spacer (4).
6. Disassemble inner ring (7) from the shaft using a
press. Disassemble snap ring (5) from the shaft
(6). Take away tool and remove pinion (2) and inner
ring (1).
7. Disassemble snap ring (8), shim (7) and outer ring
(6) from the housing. Unlock bolts (9) and take
away cover (1). Disassemble oil seal (11), snap ring
(2), shim (3) and outer ring (4) from the cover (1).
Put the tool into position (10). Tap on shaft position
(14) in order to extract shaft (5) inner ring (12) and
snap ring (13).
CROP PROCESSING - THRESHING Axial flow threshing
9714 1 27/05/2004
K.40.C / 18
4
10041868A5
5
10041869A5
6
10041869A5
7
10041870A5