Case IH AFX8010 Repair Manual page 2002

12. To remove the straight through input shaft you can
either use a press if one is available, or a large soft
face dead blow hammer.
13. The shaft must be removed with the beveled spur
gear end out first from the housing.
14. With the shaft out, the bearing (1) on the shaft can
be removed using a set of pullers or the press.
15. The remaining bearing (1) in the housing may be
removed in a press or by using a long soft drift and
a dead blow hammer driving it from the inside of
the housing out.
NOTE: Keep track of the number and orientation of shims
(2) .
CROP PROCESSING - FEEDING Feeder housing
9712 1 27/05/2004
K.25.E / 30
12
10034622
13
10034623
14
10034622A5
15
10034624A5