Case IH AFX8010 Repair Manual page 2012

21. Press the input shaft into the bearing while
supporting the rear of the bearing in the press.
22. Install the bearing under the pinion gear in a press
with the proper plug. Install shims (1) and retaining
ring.
23. Check the gear backlash using a dial indicator:
0.15/0.30 mm.
24. Use gasket compound on the access cover. Torque
bolts to 217 lb in .
CROP PROCESSING - FEEDING Feeder housing
9712 1 27/05/2004
K.25.E / 40
20
10034623
21
10034621A5
22
50034949
23
10034613