Case IH AFX8010 Repair Manual page 1732

Test Point
4 Check the resistance
between RH Mirror R-10
(pin 6) and ground.
5 Check the voltage at
German Mirror R-14
(pin 3).
6 Check the resistance
between German Mirror
R-14 (pin 6) and ground.
BODY AND STRUCTURE - USER PLATFORM
Good Reading
Less than 1 ohm
If good reading, and RH
Mirror Heat R-10 doesn't
work replace the RH Mirror
assembly.
Go to next test point if RH
Mirror Heat R-10 was not
defective.
12 volts
If good reading, go to next
test point.
Less than 1 ohm
If good reading, and
German Mirror Heat R-14
doesn't work replace the
German Mirror assembly.
E.34 / 30
Possible Cause of Bad Reading
Open in circuit 670 (BK) or 295 (BK)
between RH Mirror R-10 (pin 6) and
ground. Check the X121 (pin 6) and
X036 (pin 12) in-line connectors for
connection.
Open in circuit 862 (OR) or 931 (OR)
between German Mirror R-14 (pin 3) and
Mirror Heat Switch S-19 connector X127
(pin 3).
Open in circuit 863 (BK) or 295 (BK)
between German Mirror R-14 (pin 6) and
ground. Check the X287 (pin 6) and
X036 (pin 12) in-line connectors for
connection.