Case IH AFX8010 Repair Manual page 1997

Gearbox - Remove (K.25.E.44 - F.10.A.10)
AFX8010
1. To remove the conveyor/rocktrap gearbox proceed
as follows.
2. Remove the spline yoke bolts (1) and the bearing
caps (2)at the upper gearbox.
NOTE: The driveshaft may need to be pryed off the
splined shaft. Be careful in doing so.
3.
remove the spline yoke bolts (1) and the bearing
cap bolts (2) from the lower gearbox.
4. Remove the drive shaft away from the feeder.
CROP PROCESSING - FEEDING Feeder housing
9712 1 27/05/2004
K.25.E / 25
1
20034592
2
20034596A5
3
20034594A5