Case IH AFX8010 Repair Manual page 1777

BODY AND STRUCTURE - ENVIRONMENT CONTROL Heating, ventilation and air-conditioning
4. Install new seals, and install the storage
compartment and secure in place with eight
machine screws. Secure the bench top behind the
drivers seat at the hinges.
5. Secure the core into position using a cap screw (1).
6. Set the grate (2) and filter (2) into place in the cavity.
7. Push the grate until the locking tabs (1) snap into
place.
NOTE: If the evaporator core had been completely
removed from the combine, charge the refrigerant system
in accordance with the Recharge/Refilling procedure in
this section.
9702 1 27/05/2004
E.40.D / 33
4
10008339
5
10036370A5
6
10008337A5
7
10008336A5