Case IH AFX8010 Repair Manual page 1237

12. Insert threaded shaft (2) and seal ring. Torque to 50
- 60 Nm (37 - 44 lb ft) .
IMPORTANT: After tightening baffle bolts, rotate the input
shaft and verify that the oil baffle does not interfere with
the input shaft. If there is interference adjust and shim as
necessary or modify baffle as needed.
13.
To install the drive shaft in the transmission, first
install the bearing cup (1).
14. If necessary replace the seal (2). Install bearing cup
(3). Install shim pack (4) of 1.5 mm (1/16 in) and
O-ring (5) on cover (1).
15. Support the drive shaft (1) on a hoist and bring it
into the transmission.
NOTE: If the shifting disc is installed (3), selector fork (2)
should be installed together with the counter shaft.
POWER TRAIN - TRANSMISSION Mechanical
9680 1 27/05/2004
C.20.B / 47
12
3340c
13
3335a
14
3438a
15
3334a