Case IH AFX8010 Repair Manual page 1981

13. Slide the main feeder pivot shaft (1) completely off.
14.
Position a suitable forklift with fork extensions under
the feeder housing. To prevent plastic crop deflector
damage on the front of the feeder house it can
either be removed, or spaced away by using a block
between the feeder and the lifting device. Attach
a chain from the forklift to the rear of the feeder
housing.
15.
Remove the bolt and washer (1)from the feeder
pivot pin (2).
NOTE: The universal joint assembly may need to be
removed completely to gain access to the left side feeder
pivot pin for removal.
16.
Remove pivot pin from feeder housing and combine
frame.
17. Repeat for opposite side.
18.
Once the pins have been removed, the feeder house
is no longer attached to the combine. Carefully
back the forklift away from the combine to remove
the feeder. Have an assistant make sure that no
components remain attached to the combine.
CROP PROCESSING - FEEDING Feeder housing
9712 1 27/05/2004
K.25.E / 9
12
40030042A4
13
10030323
14
40030326A4