Case IH AFX8010 Repair Manual page 2010

13. Install the torque limiter (1) into the housing. Be
sure to align the gear mesh. Be sure to turn the
torque limiter shaft by hand once it is pressed into
the bearing (2) to assure no binding.
14. Install the bearing (1) onto the torque limiter shaft.
15. Install the snap ring (1) on the shaft (2) .
16. Install the ball bearing into the O ring cover (1) .
CROP PROCESSING - FEEDING Feeder housing
9712 1 27/05/2004
K.25.E / 38
12
10034626A5
13
10034616A5
14
10034614A5
15
10034610A5