Case IH AFX8010 Repair Manual page 1856

B. If high (>5V) voltage is found, there is a short to high voltage in the front frame (FF) harness between
connector X023 pin 17, connector X007 pin 22 and connector X020 pin J3-26 on one of the following
wires:
wire 757 pink, connector X007 pin 22 to FF harness splice
wire 727 pink, connector X023 pin 17 to FE harness splice
wire 726 pink, FE harness splice to connector X020 pin J3-26. Locate the short and repair.
14. Operate the machine while monitoring the Universal Display Plus "DIAG" screen.
A. If no high out of range readings are indicated, erase the fault code and continue operation.
B. If the fault code immediately resets, determine which 12 volts circuit (such as the shoe leveling actuator)
was activated to cause the short.
TOOL POSITIONING - LIFTING
9706 1 27/05/2004
G.10.A / 38