Case IH AFX8010 Repair Manual page 1432

4. Continue to press until the body of the universal joint
contacts the inside of the yoke. Grip the protruding
bearing cap assembly (1) and tap the yoke (2) with
a hammer. Remove the cap from the yoke.
5. To remove the opposite cap, place the tube stock
over the top of the cap in the yoke and place the
spacer on the journal end of the universal joint.
Press on the solid plug to drive the opposite bearing
cap out of the yoke and into the hollow center of
the tube stock. Continue to press until the body of
the universal joint contacts the inside of the yoke.
Grip the protruding bearing cap assembly in a vise
and tap the yoke with a hammer. Remove the cap
from the yoke.
6. Be sure your setup in the vise is square, and aligned
properly.
POWER TRAIN - FRONT PTO Mechanical
9682 1 27/05/2004
C.42.B / 6
4
20034660B
5
20034655
6
20034657