Case IH AFX8010 Repair Manual page 1379

The hydraulic oil cooler, 1, is mounted in front of the engine radiator in the main cooler assembly.
Each wheel of the powered rear axle is driven independently by its own hydrostatic motor. Each motor is driven
hydraulically by the hydrostatic pump and controlled by a single control valve.
Symbol
POWER TRAIN - TRANSMISSION Hydrostatic
20030149A5
BSC1360A
Hydraulic Line, Tube, Hose or any conductor that carries oil between components.
Oil flows in one direction only.
Oil can flow in either direction
This symbol indicates that a group of components make up an assembly.
Lines that are not connected.
Lines that are not connected.
Lines that are connected.
Vented Reservoir
9681 1 27/05/2004
C.20.F / 7
4
5
Description