Mac-Address-Table Periodic-Monitor-Time; Show Port-Security - Planet SGS-6341 Series Command Manual

13.2.2 mac-address-table periodic-monitor-time

Command:
mac-address-table periodic-monitor-time <5-86400>
Function:
Set the MAC monitor interval to count the added and deleted MAC in time, and send out them with
trap message.
Command mode:
Global Mode.
Parameter:
<5-86400>: the interval is 5 to 86400 seconds.
Default:
60 seconds.
Example:
Set the MAC monitor interval as 120 seconds.
Switch(Config)#mac-address-table periodic-monitor-time 120

13.2.3 show port-security

Command:
show port-security
Function:
Display the secure MAC addresses of the port.
Command mode:
Admin Mode and other configuration Mode.
Default:
The switch is not display port-security configuration.
Usage Guide:
This command displays the secure port MAC address information.
Example:
Switch#show port-security
Security Port
-----------------------------------------------------------------------------------------------------
Ethernet1/0/1
Ethernet1/0/3
Ethernet1/0/5
MaxSecurity Addr CurrentAddr
(count) (count)
1
10
1
13-90
Security Action
1 Protect
1 Protect
0 Protect