Planet SGS-6341 Series Command Manual page 314

Chapter 18 Commands for Flexible
18.1 add
Command:
add s-vid <new-vid>
no add s-vid
Function:
Add a specified external tag or inner tag for the packet which match the class map, no command
cancels the operation.
Parameters:
s-vid <new-vid> specifies VID of an external VLAN Tag.
Default:
Do not add the tag.
Command Mode:
Policy class-map configuration mode
Usage Guide:
Add the external tag for the packet which match the class map after this command is configured.
Example:
Add an external VLAN Tag with VID of 2 for the packet which satisfy c1 class rule.
Switch(config)#policy-map p1
Switch(Config-PolicyMap-p1)#class c1
Switch(Config-PolicyMap-p1-Class-c1)#add s-vid 2
18.2 match
Command:
match {access-group <acl-index-or-name> | ip dscp <dscp-list>| ip precedence
<ip-precedence-list>| ipv6 access-group <acl-index-or-name>| ipv6 dscp <dscp-list> | ipv6
flowlabel <flowlabel-list> | vlan <vlan-list> | cos <cos-list>}
no match {access-group | ip dscp | ip precedence | ipv6 access-group | ipv6 dscp | ipv6
flowlabel | vlan | cos}
Function:
Configure the match standard of the class map; the no command deletes the specified match
QinQ
18-160