Planet SGS-6341 Series Command Manual page 797

44.5.7 show ip pim anycast-rp first-hop
Command:
show ip pim anycast-rp first-hop
Command Mode:
Admin and Configuration Mode.
Usage Guide:
Display the state information of ANYCAST RP, and display the mrt node information generated in
the first hop RP which is currently maintained by the protocol.
Example:
Switch(config)#show ip pim anycast-rp first-hop
IP Multicast Routing Table
(*,G) Entries: 0
(S,G) Entries: 1
(E,G) Entries: 0
INCLUDE (192.168.1.136, 224.1.1.1)
Local .l..............................
Display
Entries
INCLUDE
44.5.8 show ip pim anycast-rp non-first-hop
Command:
show ip pim anycast-rp non-first-hop
Command Mode:
Admin and Configuration Mode.
Usage Guide:
Display the state information of ANYCAST RP, and display the mrt node information generated in
the non first hop RP which is currently maintained by the protocol, that is the mrt node information
which is created after the first hop RP transfers the register message it received to this RP.
Example:
Explanation
The number of all kinds of entries.
The information of mrt generated in the first hop
RP.
44-73