13.2.9 switchport port-security mac-address
Command:
switchport port-security mac-address <mac-address>
no switchport port-security mac-address <mac-address>
Function:
Add a static secure MAC address; the "no switchport port-security mac-address" command
deletes a static secure MAC address.
Command mode:
Port Mode.
Parameters:
<mac-address> stands for the MAC address to be added or deleted.
Usage Guide:
The MAC address binding function must be enabled before static secure MAC address can be
added.
Example:
Adding MAC 00-30-4f-FE-2E-D3 to port1.
Switch(config)#interface Ethernet 1/0/1
Switch(Config-If-Ethernet1/1)#switchport port-security mac-address 00-30-4f-FE-2E-D3
13.2.10 switchport port-security maximum
Command:
switchport port-security maximum <value>
no switchport port-security maximum
Function:
Sets the maximum number of secure MAC addresses for a port; the "no switchport port-security
maximum" command restores the maximum secure address number of 1.
Command mode:
Port Mode.
Parameter:
< value> is the up limit for static secure MAC address, the valid range is 1 to 128.
Default:
The default maximum port secure MAC address number is 1.
13-95