Mld snooping is turned on for vlan
1(querier)
2. Display the detailed MLD Snooping information of vlan1
Switch#show ipv6 mld snooping vlan 1
Mld snooping information for vlan 1
Mld snooping L2 general querier
Mld snooping query-interval
Mld snooping max reponse time
Mld snooping robustness
Mld snooping mrouter port keep-alive time
Mld snooping query-suppression time
MLD Snooping Connect Group Membership
Note:*-All Source, (S)- Include Source, [S]-Exclude Source
Groups
Ff1e::15
Mld snooping vlan 1 mrouter port
Note:"!"-static mrouter port
!Ethernet1/0/2
Displayed information
Mld snooping L2 general querier
Mld snooping query-interval
Mld snooping max reponse time
Mld snooping robustness
Mld snooping mrouter port keep-alive
time
Mld
snooping
query-suppression
time
MLD
Snooping
Connect
Membership
switch.
On which VLAN of the switch is enabled MLD Snooping, if the
VLAN are l2-general-querier.
Sources
Ports
(2000::1)
Ethernet1/0/8
(2000::2)
Ethernet1/0/8
Explanation
whether or not l2-general-querier is enabled on VLAN, the querier
display status is set to could-query or suppressed
Query interval time of the VLAN
Max response time of this VLAN
Robustness configured on the VLAN
Keep-alive time of the dynamic mrouter on this VLAN
timeout of the VLAN as l2-general-querier at suppressed status.
Group
Group membership of the VLAN, namely the correspondence
between the port and (S,G).
:Yes(COULD_QUERY)
:125(s)
:10(s)
:2
:255(s)
:255(s)
Exptime System Level
00:04:14
00:04:14
45-78
V2
V2