Table of Contents
Advertisement
Figure 6-1: Wall-mount Managed Switch SSHv2 Login Screen
The user can now enter commands to manage the Wall-mount Managed
Switch. For a detailed description of the commands, please refer to the
following chapters.
1. For security reason, please change and memorize the
new password after this first setup.
2. Only accept command in lowercase letter under console inter-
face..
6.1 Configuring IP Address
The Wall-mount Managed Switch is shipped with default IP address shown
below:
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Switch,
please use the procedure as follows:
Display of the Current IP Address
1. At the "#" prompt, enter "show ip interface brief".
2. The screen displays the current IP address shown in Figure 6-2.
15
Advertisement
Table of Contents
