Planet SGS-6341 Series Command Manual page 886

45.3.30 ipv6 pim rp-register-kat
Command:
ipv6 pim rp-register-kat <vaule>
no ipv6 pim rp-register-kat
Function:
This command is to configure the KAT (KeepAlive Timer) value of the RP (S, G) items, the unit is
second. The "no ipv6 pim rp-register-kat" command restores the default value.
Parameter:
<vaule> is the timer value, ranges from 1 to 65535s
Default:
185s
Command Mode:
Global Mode
Usage Guide:
Configure rp-register-kat interval to 30s.
Example:
Switch(config)# ipv6 pim rp-register-kat 30
45.3.31 ipv6 pim scope-border
Command:
ipv6 pim scope-border [<500-599>|<acl_name>]
no ipv6 pim scope-border
Function:
To configure or delete management border of PIM6.
Parameters:
<500-599> is the ACL number for the management border.
<acl_name> is the ACL name for the management border.
Default:
Not management border. If no ACL is specified, the default management border will be used.
Command Mode:
Interface Configuration Mode.
Usage Guide:
To configure the management border and the ACL for the IPV6 PIM. The multicast data flow will not
be forwarded to the SCOPE-BORDER.
Example:
45-32