Port-Group; Port-Group Mode - Planet SGS-6341 Series Command Manual

9.7 port-group

Command:
port-group <port-group-number>
no port-group <port-group-number>
Function:
Creates a port group. The no command deletes that group.
Parameters:
<port-group-number> is the group number of a port channel from 1 to 128.
Default:
There is no port-group.
Command mode:
Global Mode
Example:
Creating a port group.
Switch(config)# port-group 1
Delete a port group.
Switch(config)#no port-group 1

9.8 port-group mode

Command:
port-group <port-group-number> mode {active|passive|on}
no port-group
Function:
Add a physical port to port channel, the no operation removes specified port from the port channel.
Parameters:
<port-group-number> is the group number of port channel, from 1 to 128;
active enables LACP on the port and sets it in Active mode;
passive enables LACP on the port and sets it in Passive mode; on forces the port to join a port
channel without enabling LACP.
Command mode:
Port Mode.
Default:
Switch ports do not belong to a port channel by default; LACP not enabled by default.
9-17