Show Ipv6 Dhcp Pool; Show Ipv6 Dhcp Statistics - Planet SGS-6341 Series Command Manual

<interface-name> is the name and number of interface, if the<interface-name> parameter is not
provided, then all the DHCPv6 interface information will be shown.
Command Mode:
Admin and Configuration Mode.
Usage Guide:
To show the information for DHCPv6 interface, include Port Mode (Prefix delegation client、
DHCPv6 server、 DHCPv6 relay) , and the relative conformation information under all kinds of mode.
Example:
Switch#show ipv6 dhcp interface vlan10
Vlan10 is in server mode
Using pool: poolv6
Preference value: 20
Rapid-Commit is disabled

27.28 show ipv6 dhcp pool

Command:
show ipv6 dhcp pool [<poolname>]
Function:
To show the DHCPv6 address pool information.
Command Mode:
Admin and Configuration Mode.
Usage Guide:
<poolname> is the DHCPv6 address pool name which configured already, and the length less than
32 characters. If the <poolname> parameter is not provided, then all the DHCPv6 address pool
information will be shown.
Example:
Switch#show ipv6 dhcp pool poolv6

27.29 show ipv6 dhcp statistics

Command:
show ipv6 dhcp statistics
Function:
To show the statistic of all kinds of DHCPv6 packets by DHCPv6 server.
27-58