Show Ip Dvmrp Route - Planet SGS-6341 Series Command Manual

Command:
show ip dvmrp prune [{group <A.B.C.D> [detail]}|{source <A.B.C.D/M> group <A.B.C.D>
[detail]}|{source <A.B.C.D/M> [detail] }|detail]
Function:
Display DVMRP message forwarding item.
Default:
Do not display
Command Mode:
Any Configuration Mode
Usage Guide:
This command applies to display DVMRP multicast forwarding item, namely multicast forwarding
table calculated by dvmrp protocol.
Example:
Switch#show ip dvmrp prune
Flags: P=Pruned,H=Host,D=Holddown,N=NegMFC,I=Init
Source
Address
13.1.1.0
Displayed Information
Source Address
Mask Len
Group Address
State
FCR Exptime
Prune/Graft ReXmit-Time

44.7.12 show ip dvmrp route

Command:
show ip dvmrp
<A.B.C.D> [detail]}|detail]
Function:
Prune expire time/ Graft retransmit time
Default:
Do not display
Command Mode:
Mask Group
Len Address
24 239.0.0.1
route [{<A.B.C.D/M>[detail]}|{nexthop
44-83
State FCR Exptime Prune/Graft
Cnt ReXmit-Time
..... 1 01:59:56
Explanations
Source address
Mask length
Group address
Table item state
FCR expire time
Prune expire time/ Graft retransmit time
<A.B.C.D>[detail]}|{best-match
Off